LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2007 >> G5 L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 49. Crankshaft Rear Oil Seal Installation

49. Crankshaft Rear Oil Seal Installation



Crankshaft Rear Oil Seal Installation

Tools Required

J 42067 Rear Main Seal Installer




1. Remove excess sealer from seal recess.
2. Lubricate the outside diameter of the new crankshaft seal with clean engine oil.
3. Using the J 42067, press the new crankshaft seal into the housing. The J 42067 also establishes the depth of the seal in the crankshaft seal bore.

scientia non olet · About LEMON Manuals