Windshield Garnish Molding Replacement
Windshield Garnish Molding Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Trim Cover, Screw Panel Assembly Front Pillar |
| 2 | Screw, Panel Assembly Front Pillar Tighten: 2 N.m (18 lb in) |
| 3 | Panel Assembly, Front Pillar Tip: Disconnect the boost gauge connector if equipped. |
| 4 | Clip, Panel Assembly Front Pillar |