Rear Compartment Lid Latch Replacement

Fig 1: Latch Replacement - Rear Compartment Lid

Courtesy of GENERAL MOTORS CORP.

Rear Compartment Lid Latch Replacement

Callout	Component Name
1	Lock Cylinder Rod Tip:  Use a flat-bladed tool to release the lock rod.
2	Rear Compartment Latch Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tip:  Disconnect the electrical connector, if equipped. Tighten:  10 N.m (89 lb in)
3	Rear Compartment Lid Latch Tip:  Remove the latch through the access hole.