Ignition Key Cannot Be Removed from the Ignition Lock Cylinder
Ignition Key Cannot Be Removed from the Ignition Lock Cylinder
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Steering Wheel and Column |
| 2 | Attempt to remove the key from the ignition lock cylinder in the OFF position. Did you remove the key from the ignition lock cylinder? |
System OK | Go to Step 3 |
| 3 | Inspect the lock cylinder for damage. Is the lock cylinder damaged? |
Go to Step 5 | Go to Step 4 |
| 4 | Inspect the lock cylinder case for damage. Is the lock cylinder or release button damaged? |
Go to Step 6 | Go to Step 2 |
| 5 | Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement . Did you complete the repair? |
Go to Step 7 | - |
| 6 | Replace the lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement . Did you complete the repair? |
Go to Step 7 | - |
| 7 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |