Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0100, P0101, P0102, P0103, P0110, P0112, P0113, P0115, P0117, P0118, P0120, P0121, P0122, P0123, P0125, P0171, P0172, P0300, P0301-P0304, P0335, P0340, P0341, P0385, P0441, P0442, P0446, P0456, P0500, P2440, P2441, P2444, P2445 are not set.
- The engine has been running for at least 120 seconds and is in Closed Loop.
- The vehicle has exceeded 40 km/h (25 mph) for at least 20 seconds prior to an extended idle period.
- DTC P0130 runs once per drive cycle when the above conditions have been met.