Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0100, P0101, P0102, P0103, P0110, P0112, P0113, P0115, P0117, P0118, are not set.
The engine coolant temperature (ECT) is at least 70°C (158°F).
The engine has been running for at least 180 seconds.
The engine speed is at least 1,500 RPM.
The vehicle speed is between 40-100 km/h (25-62 mph).
The throttle position (TP) sensor input is more than 15 percent.
The ignition is ON.
DTC P0125 runs continuously once the above conditions have been met.