Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0100, P0101, P0102, P0103 are not set.
- The engine coolant temperature is less than -7°C (20°F) at engine start up.
- The engine has been running for 20 minutes or more.
- DTC P0116 runs continuously once the above conditions have been met.
OR
- The engine coolant temperature is between -7 and +10°C (20-50°F) at engine start up.
- The engine has been running for 5 minutes or more.
- DTC P0116 runs once per drive cycle when the above conditions have been met.