Fuel Injector Balance Test with Special Tool: Notes
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | First Reading |
| 2 | Second Reading |
Injector Balance Test Example (Typical)
| Cylinder | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| 1st Reading | 324 kPa (47 psi) | 324 kPa (47 psi) | 324 kPa (47 psi) | 324 kPa (47 psi) |
| 2nd Reading | 249 kPa (36 psi) | 234 kPa (34 psi) | 255 kPa (37 psi) | 269 kPa (39 psi) |
| Amount of Drop | 75 kPa (11 psi) | 90 kPa (13 psi) | 69 kPa (10 psi) | 55 kPa (8 psi) |
| Average Range: 242-262 kPa (35-38 psi) | Injector OK | Faulty injector - too much fuel drop | Injector OK | Faulty injector - too little fuel drop |