LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System - 1.8L (LNK) - Introduction (2 Of 2)) >> Repair Instructions >> Secondary Air Injection (AIR) Shut-Off Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: AIR Shut-Off Valve, Outlet Hose, Inlet Hose And Fasteners
    GM1287603Courtesy of GENERAL MOTORS CORP.
  1. Remove the secondary air injection (AIR) pressure sensor. Refer to Secondary AIR Injection Pressure Sensor Replacement .
  2. Disconnect the air inlet hose (2) from the AIR shut-off valve (3).
  3. Disconnect the air outlet hose (4) from the AIR shut-off valve.
  4. Remove the 2 fasteners (1) from the AIR shut-off valve bracket.
  5. Remove the AIR shut-off valve and bracket from the engine.
    6. Fig 2: AIR Shut-Off Valve And Bolts Removed
    GM1287601Courtesy of GENERAL MOTORS CORP.
  6. Remove the 2 bolts securing the AIR shut-off valve to the bracket and pipe assembly.
  7. Remove the AIR shut-off valve.
scientia non olet · About LEMON Manuals