LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System - 1.8L (LNK) - Introduction (2 Of 2)) >> Repair Instructions >> Secondary AIR Injection Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Electrical Connector, Air Pressure Sensor And Shut Off Valve
    GM1467195Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) from the secondary air injection (AIR) pressure sensor (2).
  2. Remove the 2 fasteners of the AIR pressure sensor (2).
  3. Remove the AIR pressure sensor (2) from the shut-off valve (3).
scientia non olet · About LEMON Manuals