LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System - 1.8L (LNK) - Introduction (2 Of 2)) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View of Accelerator Cable and Throttle Lever
    GM236863Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator cable from the accelerator pedal lever.
  2. Remove the 2 bolts (3).
  3. Remove the accelerator pedal and the pedal lever from the vehicle.
  4. Remove the one retainer, the spring, the pin, and the accelerator pedal from the pedal lever.