Installation Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: PCV Valve, PCV Valve Hose, PCV Valve Hose Clamp

Courtesy of GENERAL MOTORS CORP.

Install the PCV valve (1) into the cylinder head.
Tighten: Tighten the PCV valve to 27 N.m (13 lb ft).
Connect the PCV valve hose (3) to the PCV valve (1).
Secure the PCV valve hose with one clamp (2).