LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Oil Pan Removal

Oil Pan Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Lower Cylinder Block Nuts And Bolts Tightening Sequence
    GM236142Courtesy of GENERAL MOTORS CORP.
  1. Remove the following fasteners from the lower cylinder block:
    • The 12 bolts ( 2, 4-13,15)
    • The 4 nuts (1, 3, 14, 16)
    2. NOTE: Do not damage the oil pan contact surface of the lower cylinder block when removing the oil pan.
  2. Carefully remove the engine oil pan.
    3. Fig 2: Oil Strainer Bolts, Baffle Bolts And Baffle Nuts
    GM829152Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components from the lower cylinder block:
    • The 3 oil Strainer bolts (1)
    • The oil strainer
    • The gasket
    • The 2 oil pan baffle bolts (2)
    • The 2 oil pan baffle nuts (3)
  4. Clean the following components:
    • The inside of the engine oil pan
    • The oil pump strainer screen
    • The mating surfaces of the engine oil pan and the lower cylinder block
scientia non olet · About LEMON Manuals