LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Guide Tube Seal, Guide Tube And Bolts
    GM236501Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator from the guide tube.
  2. Unclip the crankshaft position sensor electrical connector from the guide tube.
  3. Remove the following components from the cylinder block:
    • The bolts
    • The guide tube (3)
  4. Remove the guide tube seal (1) from the guide tube.
scientia non olet · About LEMON Manuals