LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Guide Tube Seal, Guide Tube And Bolts
    GM236501Courtesy of GENERAL MOTORS CORP.
  1. Use new engine oil in order to coat the new guide tube seal.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the new guide tube seal (1) to the guide tube. Secure the guide tube to the cylinder block using one bolt (3).

    Tighten:  Tighten the bolt to 24 N.m (18 lb ft).

  3. Install the oil level indicator to the guide tube.
scientia non olet · About LEMON Manuals