LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Cylinder Head Removal

Cylinder Head Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Cylinder Head Bolts Removal Sequence
    GM829061Courtesy of GENERAL MOTORS CORP.
  1. Remove the following items in sequence:
    • The cylinder head bolts
    • The cylinder head washers
    2. Fig 2: Removing Cylinder Head
    GM829062Courtesy of GENERAL MOTORS CORP.
  2. Remove the cylinder head.
    3. Fig 3: Cylinder Head Gasket
    GM235541Courtesy of GENERAL MOTORS CORP.
  3. Remove the cylinder head gasket (1).
    4. Fig 4: Cleaning Cylinder Block Mating Surfaces
    GM234571Courtesy of GENERAL MOTORS CORP.
  4. Clean the cylinder block mating surfaces.
    5. Fig 5: Cleaning Cylinder Head Mating Surface
    GM234792Courtesy of GENERAL MOTORS CORP.
  5. Clean the cylinder head mating surface.
scientia non olet · About LEMON Manuals