LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LNK)) >> Repair Instructions >> Camshaft Removal - Intake

Camshaft Removal - Intake

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Using Wrench To Hold/Rotate Camshaft
    GM625497Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake camshaft sprocket bolt.
    2. Fig 2: View Of Sprocket Locating Pins
    GM625493Courtesy of GENERAL MOTORS CORP.
  2. Remove the cam shaft sprocket.
  3. Remove the camshaft timing gear and camshaft bearing cap.
    4. Fig 3: Camshaft Bearing Cap Bolt Removal Sequence
    GM886557Courtesy of GENERAL MOTORS CORP.
  4. Remove the intake camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
  5. Remove the front camshaft bearing cap.
  6. Remove the intake camshaft from the cylinder head.
scientia non olet · About LEMON Manuals