LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - MTN - Service, Removal & Installation, Troubleshooting & Diagnostics) >> Diagnostic Information and Procedures >> Fluid Leak Diagnosis and Repair >> Powder Method

Powder Method

WARNING: This page is about a different variant/trim than selected.
  1. Thoroughly clean the suspected leak area with solvent.
  2. Apply an aerosol powder or baby powder to the suspected leak area.
  3. Drive the vehicle for 24 km (15 mi) or until the normal operating temperatures are reached.
  4. Turn the ignition switch to the OFF position.
  5. Inspect the suspected leak area and trace the leak path through the powder in order to identify the leak source.
  6. Perform the necessary repairs.
scientia non olet · About LEMON Manuals