LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transmission - MK5 - Service, Removal & Installation, Trouble Shooting & Diagnostics) >> Repair Instructions >> Transaxle Mount Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical - 1.8L.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the right hand and left hand splash shields.
  4. Remove the 2 bolts from the front transaxle mount.
  5. Remove the front transaxle mount through bolt
  6. Remove the insulator to the mount bracket.
  7. Remove the 2 front transaxle bracket bolts and bracket from the transaxle.