LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - Mu4 - Overhaul) >> Repair Instructions >> Second Coast Brake Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying 2nd Coast Brake Piston Rod Components
    GM165160Courtesy of GENERAL MOTORS CORP.
  1. Install the following components onto the 2nd coast brake piston rod (1):
    • The 2nd coast brake inner return spring seat (2)
    • The 2nd coast brake inner return spring (3)
  2. Install the 2nd coast brake servo piston rod into the 2nd coast brake piston (4). Secure the servo piston rod with one E-ring.
  3. Install the new 2nd coast brake piston seal onto the 2nd coast brake piston.
  4. Install the 2 new 2nd coast brake servo cover seals onto the 2nd coast brake servo cover.
scientia non olet · About LEMON Manuals