LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - Mu4 - Overhaul) >> Repair Instructions >> Intermediate Shaft Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the rear planetary ring gear onto the rear planetary ring gear flange on the intermediate shaft, securing with the rear planetary ring gear snap ring.
  2. Install one new seal ring onto the intermediate shaft.
  3. Apply J 36850  to the new intermediate shaft seal ring.
scientia non olet · About LEMON Manuals