Front Planetary Gearset Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the front planetary ring gear (1) from the front planetary carrier.
- Remove the forward clutch inner thrust bearing race (3) from the top of the front planetary ring gear (1).
- Remove the front planetary ring gear thrust bearing (2) from the inside front planetary ring gear (1).
- Remove the front planetary carrier (2) from the sun gear input drum (1).
- Remove the planetary ring gear thrust bearing race (1) from the top of the front planetary carrier (2).
- Remove the front planetary carrier thrust bearing from inside of the front planetary carrier (3).
- Remove the sun gear input drum (2) from the intermediate one-way clutch and the rear planetary carrier.
- Remove the sun gear thrust washer (2) from the rear of the sun gear input drum (1).
Fig 4: Identifying Planetary Ring Gear Thrust Bearing Race, Front Planetary Carrier & Thrust Bearing