LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - Mu4 - Overhaul) >> Repair Instructions >> First Reverse Brake Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the two 1st-reverse brake piston seals from the 1st-reverse brake piston.
  2. Clean all the 1st-reverse brake components and dry thoroughly.
  3. Inspect the 1st-reverse brake discs for excessive wear or damage and replace as necessary.
  4. Inspect the 1st-reverse brake piston for cracks or porosity and replace as necessary.
  5. Inspect the 1st-reverse brake piston return spring for distortion or weakness and replace as necessary.
scientia non olet · About LEMON Manuals