LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - Mu4 - Service, Removal & Installation, Troubleshooting & Diagnostics) >> Repair Instructions >> Automatic Transmission Oil Cooler Flushing >> Clean-up

Automatic Transmission Oil Cooler Flushing: Clean-up

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the water supply hose (7) from the and bleed any remaining air pressure from the flusher tank (4).
  2. Remove the fill cap (9) from the and return any unused flushing solution to its container. Rinse the with water. Do not store the with flushing solution in it.
  3. After every third use, clean the as described in the instructions included with the tool.
  4. Dispose of any waste water/solution and transmission fluid in accordance with local regulations.