Upshifts and Torque Converter Clutch (TCC) Apply Test
WARNING: This page is about a different variant/trim than selected.
- Move the manual selector to the Drive (D) range.
- Depress the Overdrive Switch.
- Accelerate the vehicle using steadily increasing throttle pressure.
- Note the vehicle speeds and the shift points for the following gears:
- Second gear (2)
- Third gear (3)
- Overdrive (4)
Observe the vehicle speeds and the shift points at which the Torque Converter Clutch (TCC) engages. TCC apply should occur in 3rd gear.