Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
Inspect for the following conditions:
- Shift select cable out of adjustment
- Clogged or leaky shift solenoid #2
- Transaxle mechanical malfunction
- Valve body fluid passage clogged
- A faulty PCM
- A poor connection
- Rubbed through wire insulation
- A broken wire inside the insulation
An intermittent may be caused by the following conditions:
Perform the following steps if DTC P0756 cannot be duplicated:
- Read the information in the freeze frame data.
- Use the data to determine the vehicle operating conditions when the DTC was set.