Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Using a taped flat bladed tool, gently pry and release the retaining clips which secure the IP accessory center trim plate (1) to the instrument panel assembly.
- Disconnect the following components:
- The A/C switch electrical connector
- The hazard warning switch electrical connector
- The rear defogger switch electrical connector
- The passenger seat belt indicator electrical connector
- Remove the A/C switch, if necessary. Refer to HVAC Control Assembly Replacement
in HVAC Systems - Manual.
- Remove the hazard warning switch, if necessary. Refer to Hazard Warning Switch Replacement
.
- Remove the rear defogger switch, if necessary. Refer to Rear Window Defogger Switch Replacement
.
- Press the locking tabs and remove the passenger seat belt indicator from the IP center trim panel.