LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Instrument Panel Components
    GM622062Courtesy of GENERAL MOTORS CORP.
  1. Install the instrument panel wiring harness (5) to the instrument panel (2). Secure the harness with the following:
    • The wire harness retainers
    • The screws
  2. Install the left I/P outer air outlet to the instrument panel assembly. Secure the duct with the plastic retainer.
  3. Install the right I/P outer air outlet to the instrument panel assembly. Secure the duct with the screw.
  4. Install the lower instrument panel assembly. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower .
  5. Install the upper instrument panel assembly. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
scientia non olet · About LEMON Manuals