LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 1.8L (LV6) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Installation

Crankshaft Rear Oil Seal Installation

    Fig 1: Installing Oil Seal
    GM236250Courtesy of GENERAL MOTORS CORP.
  1. Apply multi-purpose grease GM P/N 1051344 (Canadian P/N 993037) or equivalent to the new crankshaft rear oil seal lip.
    2. IMPORTANT: Tap the oil seal in until its surface is flush with the crankshaft rear oil seal retainer edge.
  2. Using a hammer, lightly tap the crankshaft rear oil seal into place.
scientia non olet · About LEMON Manuals