LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> Wiring Systems - Testing, Diagnosis & Repair >> Diagnostic Information and Procedures >> Push to Seat Connectors >> Reinstalling Terminal

Reinstalling Terminal

  1. In order to reuse a terminal or lead assembly. Refer to Wiring Repairs .
  2. Ensure that the cable seal is kept on the terminal side of the splice.
  3. Insert the lead from the back until it catches.
  4. Install the TPA, CPA and/or the secondary locks.
scientia non olet · About LEMON Manuals