LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Master Cylinder Replacement (Non-ABS) >> Removal Procedure

Removal Procedure

  1. Loosen the air filter hose clamp and remove the air filter hose from the throttle body.
  2. Unhook the air filter housing hooks and remove the top portion of the housing with the hose.
    3. Fig 1: Master Cylinder Reservoir Components
    GM815132Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Brake Fluid Irritant Caution in Cautions and Notices.
    NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Cautions and Notices.
  3. Remove the master cylinder reservoir. Refer to Master Cylinder Reservoir Replacement .
  4. Remove the 2 brake pipes (2,3) from the master cylinder.
  5. Remove the 3 brake pipes (2,8,9) from the 3-way fitting (7).
  6. Remove the following components from the vacuum booster:
    1. The 2 nuts (10)
    2. The check valve bracket (1)
    3. The 3-way fitting
    4. The master cylinder
scientia non olet · About LEMON Manuals