LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Master Cylinder Bench Bleeding

Master Cylinder Bench Bleeding

    CAUTION: Refer to Brake Fluid Irritant Caution in Cautions and Notices.
    CAUTION: Refer to Brake Fluid Caution in Cautions and Notices.
    NOTE: Refer to Filling the Master Cylinder Notice in Cautions and Notices.
  1. Install the reservoir to the master cylinder. Refer to Master Cylinder Reservoir Replacement .
  2. Fill the master cylinder reservoir with brake fluid and keep full throughout the entire bleeding process.
  3. Install adapters into each master cylinder outlet port.
  4. Attach a piece of plastic tubing to each adapter and submerge the other ends in the reservoir. Ensure the tubes remain submerged in the fluid.
  5. Using a wooden or plastic dowel, slowly push in the master cylinder piston and release. Repeat the process until there is no sign of air in the brake fluid.
scientia non olet · About LEMON Manuals