LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Repair Instructions >> Drum Brake Backing Plate Replacement >> Removal Procedure

Removal Procedure

  1. Remove the wheel cylinder. Refer to Wheel Cylinder Replacement .
  2. Remove the bolt and the park brake cable from the backing plate.
  3. Remove the rear wheel bearing and hub assembly. Refer to Wheel Bearing/Hub Replacement - Rear (FWD) or Wheel Bearing/Hub Replacement - Rear (AWD) in Rear Suspension.
    4. Fig 1: Exploded View Of Drum Brake System
    GM819274Courtesy of GENERAL MOTORS CORP.
  4. Remove the backing plate (5).
scientia non olet · About LEMON Manuals