LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

    Fig 1: Rear Hood Seal
    GM821323Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the vehicle:
    • The rear hood seal (1).
    • The 7 plastic retainers.
scientia non olet · About LEMON Manuals