LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Vibe Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Description and Operation >> Exterior Lighting Systems Description and Operation >> Stop Lamps and Center High-Mounted Stop Lamp >> Mechanical System Operation >> Circuit Operation

Circuit Operation

Voltage is applied continuously from the stop fuse to the stop lamp switch. Voltage is applied from the stop lamp switch to C4 cavity 5 of the Instrument Panel Junction Block when the brake pedal is pressed. Voltage flows through the Instrument Panel Junction Block, continuing through SP300 to the Center High Mounted Stop Lamp.

SP300 applies voltage to the following lamps:

scientia non olet · About LEMON Manuals