Removal Procedure
- Disable the frontal supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 3
and to SIR Disabling and Enabling Zone 5
in SIR.
- Remove the windshield garnish moldings. Refer to Windshield Upper Garnish Molding Replacement
.
Courtesy of GENERAL MOTORS CORP.
- Using a flat-bladed tool, lift up the upper trim pad covers.
- Remove the bolts holding the upper trim pad to the I/P retainer.
Courtesy of GENERAL MOTORS CORP.
- Lift the I/P upper trim panel from the vehicle.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the ambient light sensor from the upper trim pad.
- Remove the I/P upper trim panel from the vehicle.