LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Torrent FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Knee Bolster (Filler Panel) & Screws
    GM939650Courtesy of GENERAL MOTORS CORP.
  1. Position the outer trim panel.
  2. Push to install the panel.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Fasten the screws that hold the left side trim panel to the I/P.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

scientia non olet · About LEMON Manuals