Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the cluster trim bezel.
Courtesy of GENERAL MOTORS CORP.
- Remove the center console trim bezel from the instrument panel (I/P).
Courtesy of GENERAL MOTORS CORP.
- Open the compartment door to expose the trim panel fasteners and the end cap bolt.
Courtesy of GENERAL MOTORS CORP.
- Remove the right side end cap.
Courtesy of GENERAL MOTORS CORP.
- Remove the upper I/P trim pad. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper .
Courtesy of GENERAL MOTORS CORP.
- Remove the fasteners holding the trim pad - right. Remove the trim panel from the vehicle.