Steering Column Replacement

Fig 1: Steering Column

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the knee bolster panel. Refer to Knee Bolster Replacement . Remove the knee bolster bracket. Refer to Knee Bolster Bracket Replacement - Left . Remove the steering column trim panels. Refer to Steering Column Trim Covers Replacement . Remove the steering wheel. Refer to Steering Wheel Replacement .
1	Connectors, Ignition Switch Electrical
2	Bolt, Steering Column Pinch Tighten: 20 N.m (15 lb ft)
3	Nut, Steering Column Pinch Bolt Tip: Separate the intermediate shaft from the steering column.
4	Bolt, Steering Column Support Tighten: 25 N.m (18 lb ft)
5	Bolt, Steering Column Mounting Tighten: 30 N.m (22 lb ft)
6	Column, Steering