Transmission Control Module (TCM) Replacement
WARNING: This page is about a different variant/trim than selected.
Transmission Control Module (TCM) Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications (Unit Repair) or Fastener Tightening Specifications (On Vehicle) . |
|
| 1 | Electronic Control Module (ECM) Tip: Remove the ECM from the ECM Bracket but do not disconnect the ECM electrical connectors. |
| 2 | Bolt, ECM Bracket (Qty 3). Tighten: 10 N.m (89 lb in). |
| 3 | Bracket, ECM |
| 4 | Bolt, Transmission Control Module (TCM) (Qty 3). Tighten: 10 N.m (89 lb in). |
| 5 | TCM
IMPORTANT:
Twisting or tilting of the transmission control module electrical connector while disconnecting may result in bent or misaligned electrical terminal pins. Tip: Disconnect the TCM electrical connector |