LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> Solstice Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions -- 4 Of 5)) >> Off-Vehicle Repair Instructions - Part 3 >> Thread Repair >> Crankshaft Main Bolt Hole Thread Repair >> Repair Procedure

Repair Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • In order to repair some crankshaft main bolt holes it will be necessary to mount the fixture plate upside down.
  • Do NOT remove the fixture plate prior to installing the insert with the installation driver. The fixture plate remains in position throughout the thread repair process.

The crankshaft main bearing bolt hole thread repair tooling are in the kits J 42385-2000  and J 42385-700  . The crankshaft main bearing bolt hole thread repair components consist of the following:

scientia non olet · About LEMON Manuals