Chime Inoperative

Step	Action	Yes	No
Schematic Reference: Audible Warnings Schematics or Body Control System Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views or Computer/Integrating Systems Component Views DEFINITION: One or more chime functions are inoperative.
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Install a scan tool. Turn ON the ignition, with the engine OFF. With a scan tool, perform the Chime Tone Test in the instrument panel cluster (IPC) Output Controls. Does the chime sound?	Go to Step 3	Go to Step 4
3	Turn the ignition OFF. Open the driver door. With a scan tool observe the Driver Door Ajar Switch parameter in the body control module (BCM) Keyless/Remote Start Data List. Does the Driver Door Ajar Switch parameter display Door Ajar	Go to Testing for Intermittent Conditions and Poor Connections	Go to Door Ajar Indicator Malfunction
4	Replace the IPC. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement?	Go to Step 5	-
5	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2