LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) End Right >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  2. Remove the body control module. Refer to Body Control Module Replacement in Computer/Integrating Systems.
    3. Fig 1: View Of Right End Bracket Assembly, Bolts & Screws
    GM1363052Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw (1) attaching the right end bracket assembly (2) to the lower radio bracket.
  4. Remove the bolt (6) attaching the right end bracket assembly (2) to the lower radio bracket.
  5. Remove the bolts (3) and (4) attaching the right end bracket assembly (2) to the vehicle.
  6. Remove the two bolts (5) attaching the right end bracket (2) to the instrument panel inflatable restraint.
  7. Detach the wiring harness and remove the right end bracket assembly (2) from the vehicle.
scientia non olet · About LEMON Manuals