LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bezel Replacement - Floor Console >> Removal Procedure

Removal Procedure

    Fig 1: Door Lock Power Switch & Traction Control Switch
    GM1679494Courtesy of GENERAL MOTORS CORP.
  1. Remove the console trim plate. Refer to Trim Plate Replacement - Console .
  2. Remove the bezel (1) by disengaging the 4 retaining tabs securing the bezel to the console trim plate.
  3. Disengage the 2 retaining tabs on the traction control switch (3), if equipped and remove the traction control switch (3) from the bezel (1).
  4. Disengage the 2 retaining tabs on the door lock power switch (2) and remove the power door lock switch (2) from the bezel (1).
scientia non olet · About LEMON Manuals