LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2006 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Diagnostic Information and Procedures >> DTC B0019 or B0020 >> Circuit Description

Circuit Description

The air bag sensing and diagnostic module (SDM) sends serial data along the serial data line via the body control module (BCM). This is read by the instrument cluster, which displays the status of the SDM on the multifunction display (MFD) and the air bag warning indicator.

DTC B0019 or B0020

Step Action Value(s) Yes No
1 Did you perform the Diagnostic System Check - Vehicle? - Go to Step 2  Go to Diagnostic System Check - Vehicle
2
  1. Install a scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. Select Diagnostics/Model Year/Vehicle Model/Body/Instrument/Diagnostic Trouble Codes/Read DTC Information.
Does the Tech 2 display DTC 12?		 - Go to DTC B0012  Go to Step 3 
3 Replace the sensing and diagnostic module (SDM). Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement .
Did you find and complete the repair?		 - Go to Step 4  -
4
  1. Use the scan tool in order to clear the DTCs.
  2. Operate the vehicle within the Conditions for Running the DTC, as specified in the supporting text.
Does the DTC reset?		 - Go to Step 2  System OK
scientia non olet · About LEMON Manuals