Removal Procedure

Open the instrument panel (I/P) compartment door.
Remove the reinforcement cover from the I/P door. Refer to Door Replacement - Instrument Panel (I/P) Compartment .
Disconnect the anti-rattle device from the door latch mounting point, if equipped.

Fig 1: Disconnecting (I/P) Compartment Door Latch Anti-Rattle Device
Courtesy of GENERAL MOTORS CORP.
Remove the screws (1) from the I/P compartment door latch (2).

Fig 2: Identifying I/P Compartment Door Latch Screws
Courtesy of GENERAL MOTORS CORP.
Remove the door latch (2) from the I/P compartment door (3).
Remove the anti-rattle device from the door latch (2), if equipped.
Remove the door latch handle from the I/P compartment door.

Fig 3: Removing (I/P) Compartment Door Latch
Courtesy of GENERAL MOTORS CORP.