LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement (Pontiac) >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector (5) to the IP cluster (2).
  2. Position the IP cluster retainer tabs (4) into the IP carrier.
  3. Install the IP cluster (2) to the IP carrier.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Removing (I/P) Cluster Screws (Pontiac)
    GM288303Courtesy of GENERAL MOTORS CORP.
  4. Install the IP cluster screws (1, 3).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Install the IP trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) (Pontiac)  or Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet) .
scientia non olet · About LEMON Manuals