Instrument Panel Cluster (IPC) Replacement
Instrument Panel Cluster (IPC) Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure Remove the I/P cluster trim. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster . |
|
| 1 | Screw, Cluster Assembly Tighten: 2 N.m (18 lb in) |
| 2 | Cluster Assembly, Instrument Panel Tip: Disconnect the electrical connector. |