LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Pursuit Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Cushion Frame Replacement - Front

Seat Cushion Frame Replacement - Front

Fig 1: Front Seat Cushion Frame
GM1538064Courtesy of GENERAL MOTORS CORP.
Seat Cushion Frame Replacement - Front

Callout Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices.
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the front seat. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat cushion inner trim cover. Refer to Seat Cushion Inner Trim Panel Replacement .
  3. Remove the seat cushion outer trim cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
1 Screw, Seat Cushion Assembly (Qty: 4)

Tighten:  25 N.m (18 lb ft)

2 Frame Assembly, Seat Cushion
Tip: 
  • Remove the lumbar adjuster screws.
  • Disconnect the cushion heater electrical connector.