Removal Procedure

Fig 1: View Of Upper Door Stop

Courtesy of GENERAL MOTORS CORP.

Open the instrument panel (I/P) compartment. Disengage the door stop using the following procedure:
1. Press the upper door stop (2) toward the center of the vehicle.
2. Rotate the door away from the compartment.

Fig 2: View Of I/P Accessory Trim Plate

Courtesy of GENERAL MOTORS CORP.

Pull the I/P accessory trim plate rearward slightly for access to the edge of the trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .

Fig 3: View Of I/P Trim Plate

Courtesy of GENERAL MOTORS CORP.

Pull the I/P inboard trim plate toward the passenger door opening. Remove the I/P trim plate.